Aqua Crete

    
Polycarbon/Polycarbonate liquid applied elastomeric coating
Pro-Seal Aqua CreteTM is a  single component breathable elastomeric coating with exceptional elongation and elasticity for decorative finishes over negative side trowel coats.
 
Applications
  • Concrete
  • CMU Block
  • Stucco
  • Areas of greater expansion and contraction requiring a water barrier

Aqua Flex

    

Liquid applied elastomeric coating


Pro-Seal Aqua FlexTM is a single component elastomeric coating with exceptional elongation and elasticity.  

 

Applications

  • Concrete
  • CMU Block
  • Stucco
  • Areas of greater expansion and contraction requiring a water barrier

Deck Flex HT

    

Top build-up coating


Pro-Seal Deck Flex HTTM is a single component non-gassing top build-up coating for concrete substrates. This product is an integral component of the Pro-Seal ALHT SystemTM inclusive of:

  • Pro-Seal DP-36
  •  Pro-Seal Prime Flex IIITM
  •  Pro-Seal Deck Flex HTTM
  • Pro-Seal Ureflex ALTM
  • Pro-Seal PolyscrimTM

Applications

  • Wood Decks (when used with proper primer and flashing materials)
  • Metal Decks (when used with proper primer)
  • Concrete
    • Parking decks
    • Industrial floors
    • Walkways
    • High traffic work area
    • Decorative entries
    • and more

Hydro Paint I

    

 Light coating


Pro-Seal Hydro Paint ITM is a two component coating with extender solvent.

 

Applications on Concrete

  • Damp environments
  • Production areas where high volumetraffic causes wear and tear on surfaceMild secondary containment

Hydro Paint II

    

Light coating


Pro-Seal Hydro Paint IITM is a two component coating with non-solvent extender.

 

Applications on Concrete

  • Damp environments
  • Production areas where high volume traffic causes wear and tear on surface
  • Mild secondary containment

Hydro Paint Rubberized

    

Rubberized coating


Pro-Seal Hydro Paint RubberizedTM is a single component, synthetic rubber elastic coating.

 

This product has been designed for use as a mild range chemical resistant coating.

 

Applications on Concrete

  • Harsh environments
  • Water tanks
  • Holding tanks
  • Ponds
  • Pools
  • Mild secondary containment

PC-V Build-Up Kote

    

Build-up coating


Pro-Seal PC-V KoteTM is a single component build-up coating that will not support growth of major mold and mildew groups.

 

Applications

  • Exterior membrane for concrete pools
  • Exterior building and waterproofing
  • Joint membrane or corrugate steel, aluminum, transite, and miscellaneous other panel construction on roofs and sidewalls
  • Elastic membrane roof coating on concrete domes, folded plate, and other contemporary designs
  • Interior waterproofing where high tensile strength is needed
  • Exterior waterproofing of most surfaces

PC-V Primer

    

Penetrating primer


Pro-Seal PC-V PrimerTM is a single component deep penetrating primer.

 

Applications

  • Exterior membrane for concrete pools
  • Exterior building and waterproofing
  • Joints membrane or corrugated steel, aluminum, transite, and miscellaneous other panel construction on roofs and sidewalls
  • Elastic membrane roof coating on concrete domes, folded plate, and other contemporary designs
  • Interior waterproofing where high tensile strength is needed
  • Exterior waterproofing of most surfaces

PC-V Top Kote

  

High sheen color-fast top coating


Pro-Seal PC-V Top KoteTM is a single component high sheen top coating that is stabilized for excellent actinic and U.V. resistance.

 

Applications

  • Fusing top coat for longer surface life
  • Water containment structures
  • Exposed structural steel beams, joints, roofs, columns, etc
  • Curtain wall panels such as transite, insulating steel, etc
  • Exposed steel in sewage areas
  • Metal fascia and other exposed architectural metal surfaces

Power Kote AGV

    

High abrasion traffic coating


Pro-Seal Power Kote AGVTM is a three component coating for high abrasion traffic surfaces.

 

This product was originally designed for automated guidance vehicle track-ways in automotive manufacturing plants.

 

Applications

  • Use high abrasion traffic areas such as
    • AGV track-ways
    • Coal chute
    • Grain elevators
    • Roller paths

Power Kote I

    

Two part coating


Pro-Seal Power Kote ITM is a high density two-part coating. This product is designed to approach an entire infrastructure repair or new construction challenge.

 
Applications
  • Production areas with high traffic volume
  • Damp environments
  • Mild secondary containment

Power Kote II

    

Two part coating


Pro-Seal Power Kote IITM is a high density two-part chemical and wear resistant coating. This product is designed to approach an entire infrastructure repair or new construction challenge.

 

Applications

  • Primary containment
  • Secondary containment
  • Structural Preservation
  • Rehabilitation
  • Cosmetic improvement to high traffic, and chemically exposed areas. 

Power Kote III

    

Two part chemical and wear resistant coating


Pro-Seal Power Kote IIITM is a high density two-part chemical and wear resistant coating. This product is designed to approach an entire infrastructure repair or new construction challenge.

 

Of each of the Pro-Seal Power KoteTM systems, this system is the most chemically resistant.

 

Applications

  • Primary containment
  • Secondary containment on high concetration chemical environments
  • Waste Water Treatment Facilities

Prime Flex III

    

Primer for concrete substrates


Pro-Seal Prime Flex IIITM is a two component primer for concrete substrates. This product is used to prime substrates for Pro-Seal monolithic coatings.

 
Applications
  • Concrete substrates
  • Parking decks
  • Industrial floors
  • Walkways
  • High traffic work areas
  • Decorative entries
  • and more

TVB Mastic

    

Vapor and mold control mastic


Pro-Seal TVB Mastic™ is a single component mastic designed to be applied through moisture and fluid contaminants and meant to be used in conjunction with Pro-Seal TVB Top Kote™. This system is designed specifically for vapor and mold control.

 

Applications

  • Interior concrete substrates in need of vapor and/or mold control
    • High traffic hallways
    • Retail spaces
    • Basements
    • Office facilities
    • Any area that will be covered with carpet or tile

TVB Top Kote

    
Vapor and mold control coating
Pro-Seal TVB Top Kote™ is a single component moisture cured top coating meant to be used in conjunction with Pro-Seal TVB Mastic™.  This system is designed specifically for vapor and mold control.
 
Applications
  • Interior concrete substrates in need of vapor and/or mold control
    • High traffic hallways
    • Retail spaces
    • Basements
    • Office facilities
    • Any area that will be covered with carpet or tile

UreFlex AL

    
Coating for concrete substrates
Pro-Seal Ureflex AL™ is a single component coating for concrete substrates.  This product is an integral component of the Pro-Seal ALHT System™ inclusive of:
  • Pro-Seal DP-36™
  • Pro-Seal Prime Flex III™
  • Pro-Seal Deck Flex HT™
  • Pro-Seal Ureflex AL™
  • Pro-Seal Polyscrim™
Applications on Concrete
  • Parking decks
  • Industrial floors
  • Walkways
  • High traffic work areas
  • Decorative entries
  • and more
  • Wood Decks (when used with proper primer)
  • Metal Decks (when used with proper primer

<< Back

 

©Copyright 2004 Proseal
Created and maintained by WSI
This site is optimized for Netscape 4.0  and Internet Explorer 5.0 or higher. Please download an updated version.